| Range
of Products:
1.
Power & Distribution Transformers up to 5 MVA 33 KV class
with Off Circuit and On Load Tap Changers.
2.
Converter Duty Transformers.
3.
Low voltage high current Transformers
4.
Furnace Transformers
5.
Air cooled Transformers of 11 KV class.
6.
Special type of transformers such as Isolation, Scott
connected etc.
7.
We undertake complete repairs / servicing of transformers and
OLTC.
We
have facility to manufacture most of the components required
for building the transformers IN-HOUSE
Core:
The Core is constructed from laminations of Cold Rolled Grain
Oriented (CRGO) low loss electrical silicon sheet conforming
to the latest international standards. Each lamination is
coated on both sides with carlite insulation which is
unaffected by continuous operation in oil at temperatures
normally experienced in service of transformers. The core is
with mitred joints to reduce corner iron losses and
magnetising current and also is designed to have uniform flux
distribution throughout the magnetic circuit.
The
core limbs are securely bound and yokes are firmly clamped
between the mild steel Channels to reduce vibration and
inherent humming noise to a minimum. The top and bottom clamps
are secured to each other by means of tie rods which secure
clamps and also keep the winding in position during normal
operation and under fault conditions. The complete core and
clamps are effectively earthed.
|
ABOUT
US
